ADORE Gel for building up One Drop Gel buy in Amoreshop
One Drop Gel is a medium-thick camouflaging gel for building up, strengthening and correcting the architecture of nails of medium and above medium length.
It is used for:
- build-up to upper and lower forms;
- strengthening and correction of nail architecture in the technique "without sawdust" and in combined techniques in combination with harder polymer materials.
The gel has medium pigmentation, the natural shade of the gel camouflages the transition from a natural nail to an artificial one, adapting to the color of the nail plate.
Easy to use and store thanks to the vacuum dosing system: one push = one drop. The volume of the drop is regulated by the force of pressure on the pump.
Advantages of one Drop Gel:
+ comfortable medium-thick consistency;
+ cold polymerization;
+ natural shades.
The main advantage is excellent self-leveling.
Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.
Please note that the transparent protective silicone cap must be removed from the pump before use.
Volume: 30 ml
Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (with the help of a buff) and chemically (with the help of PREP&FINISH and a lint-free napkin) degrease the NP
2. Dehydration/dehydration: apply NAIL FRESHER to the entire nail, let it dry in the air until a whitish shade appears on the surface of the nail
3. Bonding: when using PRO BASE-BOND adhesive base, skip this step
4. Base coat: apply an even primer coat of PRO BASE-BOND base coat, carefully framing the side walls and free edge. Polymerize the base coating in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire surface of the NP with a margin of 1 mm from the cuticle. Apply a second leveling layer on the non-dried gel, taking into account the basic principles of modeling with solid materials. Polymerize in a UV lamp for 2-4 minutes, in an LED lamp for 90 seconds.
Remove residual stickiness with PREP&FINISH and a lint-free tissue. Use a file of 150/180 grit to perform step-by-step sawing of the form.
PRO Tips:
- to facilitate the laying out of the material, you can use upper forms or gel tips
- to prevent peeling from the free edge, we recommend filing the natural nail from the inside by 1-2 mm.
Build-up: prepare / install forms on each finger in turn. Lay out a thin substrate of the desired length and shape directly on the lower or upper form, model the nail architecture with gel on it. To create an arch, you can compress the gel for 7-12 seconds, depending on the type and power of the lamp. Next, send the nail to the lamp until the gel is completely polymerized for 60 seconds in the LED lamp, 3-4 minutes in the UV lamp.
Remove residual stickiness with PREP&FINISH and a lint-free tissue. Use a 150/180 file to perform step-by-step sawing of the form.
PRO tip:
apply the gel with a minimum distance of 1 mm from the cuticle to avoid flaking of the material in this area/
Why you should order ADORE One Drop Gel on our website
The Amoreshop store always offers a wide range of products at a low price, and the customer support service will allow you to quickly solve questions about the product you are interested in.
You can familiarize yourself with the entire range of products by going to https://amoreshop.com.ua/ua/
