ADORE One Drop Gel for extensions buy at Amoreshop
One Drop Gel is a medium-thick camouflage gel for building, strengthening and correcting the architecture of nails of medium and above medium length.
Is used for:
- extensions to upper and lower forms;
- strengthening and correction of nail architecture using the “saw-free” technique and combined techniques in combination with more rigid polymer materials.
The gel has medium pigmentation; the natural shade of the gel camouflages the transition from a natural nail to an artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The volume of the drop is regulated by the force of pressing on the pump.
Benefits of one Drop Gel:
+ comfortable medium-thick consistency;
+ cold polymerization;
+ natural shades.
The main advantage is excellent self-leveling.
Hardness is high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.
Please note that before use, you must remove the transparent silicone cap from the pump.
Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free cloth) degrease
2. Dehydration/dehydration: apply NAIL FRESHER to the entire nail, allow to air dry until a whitish tint appears on the surface of the nail.
3. Bonding: if using PRO BASE-BOND adhesive base, skip this step.
4. Base coat: Apply a uniform primer coat of PRO BASE-BOND, carefully framing the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire surface of the NP with a distance of 1 mm from the cuticle.
Apply a second leveling layer over the undried gel, taking into account the basic principles of modeling with solid materials. Polymerize in a UV lamp for 2-4 minutes, in an LED lamp for 90 seconds.
Remove residual stickiness using PREP&FINISH and a lint-free cloth. Using a 150/180 grit file, perform step-by-step filing of the shape.
PRO Tips:
- to facilitate laying out the material, you can use top forms or gel tips.
- to prevent detachments from the free edge, we recommend cutting out the inside of the natural nail by 1-2 mm.
Extension: prepare/install forms on each finger one by one. Place a thin backing of the desired length and shape directly on the lower or upper form, and use it to model the architecture of the nail with gel. To create an arch, you can press the gel for 7-12 seconds, depending on the type and power of the lamp. Next, send the nail to the lamp until the gel is completely polymerized for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove residual stickiness using PREP&FINISH and a lint-free cloth. Using a 150/180 file, perform step-by-step filing of the shape.
PRO tip:
Apply the gel at a distance of min. 1 mm from the cuticle to avoid material detachment in this area.
Why you should order ADORE One Drop Gel extension gel on our website
The Amoreshop store always offers a wide range of products at low prices, and the customer support service will allow you to quickly resolve your issue.
You can view the entire range of products by going to https://amoreshop.com.ua/
