Light green silicone milling cutter attachment (polishing nails to a shine).
This attachment is used for hardware manicure and pedicure, namely for polishing natural and artificial nails to a shine. Has a soft texture for a final polish. The nozzle can be washed and disinfected.
When working with silicone polishers, you should pay attention to:
For a high-quality and quick effect, whether polishing artificial or natural nails, first use a harder attachment, and only then the finishing one to polish to a shine. For significant unevenness and roughness, use gradually, first the hardest nozzle, then the medium one, and only then, for polishing to a shine, the finishing one.
Do not keep the polisher in one place, but constantly move it in a circle, otherwise it will heat the nail too much, do not use at high speeds.
Head diameter: 6mm
Head height: 17 mm
Shank length: 33mm
Shank diameter: 2mm
Shape: bullet
Caring for the nozzles is also important:
Important! Do not heat-treat silicone nozzles, otherwise the material will lose its shape and become unsuitable for further work.
It is safer to store attachments in a special lockable stand. Nozzles must be disinfected, cleaned and sterilized after each use and each client.
Immediately after work, place the nozzle in a disinfectant solution; before this, it should not be used. rinse under water. Once disinfected, only then should it be rinsed under running cold water.
Next, clean the silicone nozzle.
After this we move on to sterilization. In this case, chemical treatment (concentrates) is used , otherwise during heat treatment the material will lose its shape and become unsuitable for further work.
The meaning of the abbreviation in the name of the nozzle:
R(H)_XXX_X
R – reversible;
H – in one direction;
N(S)_XXX_X
N – natural (felt);
S – silicone;
N(S)_XXX_S
K – manufacturer Korea.
Для полировки данная насадка не подойдет. Обратите внимание на светло-зеленые силиконовый насадки, например: http://amoreshop.com.ua/nasadka-silikonovaya-s304b.html