Atica rubber camouflage base for gel polish Pink (pink), 15 ml

Atica rubber camouflage base for gel polish is an American product that provides long-lasting coverage without chipping or tarnishing - everything. The thick rubber base for gel polish takes care of the health of your nails and their beauty. It is applied with rubbing movements after pretreatment of the nail. The convenient brush draws in the optimal amount of product. Product consumption is minimal, since even a thin layer is sufficient. The base is also suitable for flattening the nail plate.

The Atica base has a special composition that helps protect the nails from delamination and brittleness, exposure to household chemicals and constant mechanical contact. Use it as a solid foundation for your best designs. Due to the ideal density of the base, color gel polishes lay down very evenly, do not strip, do not spread and are worn up to 4 weeks. It does not change its structure over time, therefore it is suitable for both home and salon use.

Shade: pink

Volume: 15 ml

ATICA gel polish application technology:

1. Do the standard nail preparation: peel off the previous coat, remove the cuticle, buff the surface and shape the nails as desired. Then it is recommended to clean the nail plate with a disinfectant and degreaser. If necessary, apply ultrabond - a special acid-free preparation for additional adhesion of subsequent coatings to the natural nail.
2. Apply a thin layer of gel polish base coat to the nail, then cure it in a UV lamp for 2 minutes, or in an LED lamp for 30 seconds.
3. Apply 2 coats of color gel polish. Remember to seal every layer (including base and top). The polymerization time of the color gel polish in the LED lamp is 30 seconds. For UV and weak lamps, we recommend applying a thin layer of color gel polish, due to the high pigmentation of the gel polish. The polymerization time in a UV lamp is 2 minutes. Warning: if you want to use highly pigmented gel polishes, your UV lamp must be at least 36 W and LED lamp at least 9 W, and the bulbs must be changed on time.
4. Apply a thin layer of top coat for gel polish, cure in LED lamp for 90 seconds. In a UV lamp, the maximum amount of time indicated on the timer.
5. Apply cuticle oil when finished.