Touch Rub aurora powder 01, 5 ml

Touch Rubbing aurora powder buy at Amoreshop

TOUCH AURORA POWDER is a collection of 10 ultra-fine pearl powders that rub in very easily and tightly. Due to the fact that the rub consists of ultra-fine particles of premium quality, it is applied without gaps or unevenness, which makes the manicure process much easier. Aurora Powder will complement any coating with its shimmering shine. The most delicate shimmers on light shades, reminiscent of pearls, or bright highlights on dark colors. Also gives a wet effect to the coating. One rub on different colors will shine with different colors.

IMPORTANT! All Aurora Powder rubs weigh 5 g, but visually they may differ from each other in the amount of filling in the jar. The following factors influence this:

• Pigment density. A rub of one color may be more dense and visually occupy less volume than a less dense rub of a different color.
• Compound. Some shades may contain additional components and microelements that also affect the overall volume.

Advantages:
• suitable for nail design;
• fine grinding;
• pearl effect on light shades;
• bright tints on dark shades;
• uniformity of rubbing;
• does not lose shine;
• does not fade;
• economical use due to the density of the rubbing pigment;
• pearly shine regardless of lighting

PECULIARITIES:
A pearl rub that will add shine to any plain coating and will also become a highlight in designs. Rubs in evenly and maintains shine throughout the entire period of wearing the coating. All 10 shades of rubs shimmer from one to five different colors.

Volume: 5 ml

Mode of application:

Standard preparation of the nail plate, namely:

• The sawdust was done using a 240 grit surface file or a buff.
• Degreasing the nail plate.
• Applying dehydrator.
• primer/ultrabond (acid-free primer) apply with a semi-dry brush without touching the skin. It’s best to apply it to the end of the nail, without layering.
• Apply a transparent elastic base in a thin or rubbing layer.
• Dry.
• Perform standard leveling with Rubber base or strengthen nails. The maximum thickness in the apex area should not exceed 1 mm.
• File the end to form the thickness and frame of the mold.
• Cover with your desired color or leave the camouflage coating on.
• Apply a thin layer of non-sticky topcoat.
• Dry for 30 seconds.
• Using a light rubbing motion, using an applicator or your finger, apply the rub onto the still hot top.
• The rub can also be applied to the TOUCH camouflage top.
• Take away any excess soft brush to avoid damaging the coating.
• File the free edge with a soft file or buff.
• Apply Ultrabond to the free edge.
• Secure the free edge or half of the nail plate with AIRY BASE and dry.
• Secure with a light leveling topcoat and cure in a lamp for 120 seconds.

It is recommended to apply the rub to a pre-strengthened nail plate to prevent chipping in the free edge area.

The rub will look great on both nude or light and dark surfaces.

Each color will reveal a new shimmer and vibrant colors of the Northern Lights shades.

Why is it worth ordering Touch Rubbing aurora powder on our website?

The Amoreshop store always offers a wide range of products at low prices, and the customer support service will allow you to quickly resolve your issue.

You can view the entire range of products by going to https://amoreshop.com.ua/