Machine for manicure ZS-603 buy at Amoreshop
Milling cutter ZS-603 - apparatus for manicure and pedicure will become an indispensable assistant in the field of hardware manicure and pedicure services. Its power is 45 W at a rotation speed of up to 35 thousand revolutions.
The main advantage of the model is the absence of vibration. The handle is equipped with a self-cooling function, which guarantees a long working life.
The rotation speed is adjusted using the rotary knob located on the front surface of the device. The direction of rotation of the cutter can also be changed using a special switch located at the bottom of the front surface of the device.
The device is equipped with a reverse - changing the direction of rotation of the cutter.
Set composition:
- set of 6 nozzles;
- power unit;
- handle-micromotor;
- handle stand.
Power: 45W
Voltage: 220-240V, 50Hz
Maximum number of revolutions: 35000 rpm.
Block dimensions (+/-): 158*122*74mm
Approximate block weight: 0.476 kg
Handle length (+/-): 14.5 cm
Estimated handle weight: 0.102 kg
Warranty period: 3 months
User manual for working with Nail Drill ZS-603:
- Need to connect the handle to the main unit
- Then we insert the nozzle into the handle and fix it. It is not recommended to turn on the device without a nozzle!
- To control the speed, use the rotary control. It is undesirable to work at maximum speed.
- You can change the direction of the cutter using the reverse. It is best to do this in the off state.
Attention!
There may be a voltage switch on the back of the router, which must always be in the 220 V position, otherwise the device may burn out.
The router must be placed on a flat surface, not covered with cloth, in order to avoid blocking the holes in the bottom of the block. Otherwise, the device may burn out. Time of continuous work by a milling cutter is limited. During use, it is necessary to check tactilely (by hand) the heating temperature of the milling unit: if it is hot, then the work must be interrupted and wait for complete cooling. Do not force the router to cool down (place it under air conditioning, put ice on it, use a hair dryer, etc.), as this can damage the board. To avoid problems associated with a voltage drop in the network, it is recommended to connect the router through a voltage stabilizer. After serving two or three customers, it is necessary to clean the handle of the router, disassembling it and removing sawdust particles.
Why it is worth ordering the ZS-603 Manicure Machine on our website
Amoreshop always offers a wide range of products at a low price, and a customer loyalty program will allow you to quickly resolve issues on the product you are interested in.
You can get acquainted with the entire range of goods by going to the address https://amoreshop.com.ua/
