Machine for manicure ZS-603 buy in Amoreshop
Milling cutter ZS-603 - the device for manicure and pedicure will become an indispensable assistant in the field of hardware manicure and pedicure services. Its power is 45 W at a rotation speed of up to 35 thousand revolutions.
The main advantage of the model is the absence of vibration. The handle is equipped with a self-cooling function, which guarantees the duration of the work.
The rotation speed is regulated by means of a rotary regulator located on the front surface of the apparatus. The direction of rotation of the cutter can also be changed using a special switch located at the bottom of the front surface of the device.
The device is set to reverse - changing the direction of rotation of the cutter.
The set includes:
- a set of 6 attachments,
- foot pedal,
- power unit,
- micromotor handle,
- stand under the handle.
Power: 45W
Voltage: 220-240V, 50Hz
Maximum number of revolutions: 35000 rpm.
Unit dimensions (+/-): 158 * 122 * 74 mm
Approximate unit weight: 0.476 kg
Handle length (+/-): 14.5cm
Approximate handle weight: 0.102 kg
Warranty period: 3 months
User manual for Nail Drill ZS-603:
- Need to connect the handle to the main unit
- Next, the pedal is connected
- Then we insert the nozzle into the handle and fix it. It is not recommended to turn on the device without a nozzle!
- Now we select the operating mode Foot or Hand, foot or manual.
- To regulate the speed in manual mode, we use a rotary regulator, in foot mode, a pedal. It is undesirable to work at maximum speed.
- You can change the direction of the cutter using the reverse. It is best to do this in the off state.
Attention!
There may be a voltage switch on the back of the router, which must always be in the 220 V position, otherwise the device may burn out.
The router must be placed on a flat surface not covered with cloth to avoid blocking the holes in the bottom of the block. Otherwise, the appliance may burn out. The time of continuous work with the milling cutter is limited. During use, it is necessary to check tactilely (by hand) the heating temperature of the milling unit: if it is hot, then work must be interrupted and wait until it has completely cooled down. Do not forcibly cool the router (put it under an air conditioner, put ice, use a hair dryer, etc.), as this can damage the board. To avoid problems associated with a voltage drop in the network, it is recommended to connect the router through a voltage stabilizer. After serving two or three customers, it is necessary to clean the router handle by disassembling it and removing sawdust particles.
Why it is worth ordering the Machine for manicure ZS-603 on our website
Amoreshop always offers a wide range of products at a low price, and the customer loyalty program will allow you to quickly resolve questions about the product you are interested in.
You can get acquainted with the entire range of goods by going to https://amoreshop.com.ua/
