Komilfo Blending Solution for Aqua Drops
Color: transparent base
Volume: 5 ml
Ingredients : Butyl, Acetate Etil, Acetate Alcohol.
KOMILFO AQUA DROPS APPLICATION TECHNOLOGY:
one.Do the standard nail preparation: peel off the previous coat, remove the cuticle, buff the surface and shape the nails as desired. Then it is recommended to clean the nail plate with a disinfectant and degreaser. If necessary, apply ultrabond - a special acid-free preparation for additional adhesion of subsequent coatings to the natural nail.
2.Apply a thin layer of Komilfo base coat for gel polish on the nail, then cure it in a UV lamp for 2 minutes, or in an LED lamp for 30 seconds.
3.Apply 2 coats of Komilfo color gel polish. Remember to seal every layer (including base and top). The polymerization time of color gel polish in the LED lamp is 30 seconds For UV and weak lamps, we recommend applying a thin layer of color gel polish, due to the high pigmentation of the gel polish. The polymerization time in a UV lamp is 2 minutes. Warning: if you want to use highly pigmented gel polishes, your UV lamp must be at least 36 W and the ice lamp must be at least 9 W, and the bulbs must be changed in a timely manner.
four.Apply Komilfo Blending Solution base to the color gel polish.
five.Create your own unique design with colored Komilfo Aqua Drops.
Komilfo Aqua Drops IS AIR-DRY within 2-3 minutes! Then zabaf the butt.
6.Apply a thin layer of rubber base over the design. Dry in a LED lamp for 30 seconds, in a UV lamp for 2 minutes.
7.Apply a thin layer of Komilfo Gel Polish Top Coat, cure in an LED lamp for 90 seconds. In a UV lamp, the maximum amount of time indicated on the timer.
eight.Apply cuticle oil when finished.
Доброго дня. Komilfo Blending Solution for Aqua Drops - прозора основа, що необхідна для роботи з акварельними фарбами.