Atica rubber base for gel polish, 15 ml

Atica rubber base provides a long-lasting finish without chipping or tarnishing. This base is applied by rubbing in after pretreatment of the nail. Convenient brush allows you to draw the required amount of product. The base is excellent for leveling the nail plate, has a special composition that helps protect the nails from delamination and brittleness, exposure to household chemicals and constant mechanical contact. Due to the ideal density of the base, color gel polishes lay down very evenly, do not strip, do not spread and are worn up to 4 weeks.

Volume: 15 ml

ATICA gel polish application technology:

1. Do the standard nail preparation: peel off the previous coat, remove the cuticle, buff the surface and shape the nails as desired. Then it is recommended to clean the nail plate with a disinfectant and degreaser. If necessary, apply ultrabond - a special acid-free preparation for additional adhesion of subsequent coatings to the natural nail.
2. Apply a thin layer of gel polish base coat to the nail, then cure it in a UV lamp for 2 minutes, or in an LED lamp for 30 seconds.
3. Apply 2 coats of color gel polish. Remember to seal every layer (including base and top). The polymerization time of the color gel polish in the LED lamp is 30 seconds. For UV and weak lamps, we recommend applying a thin layer of color gel polish, due to the high pigmentation of the gel polish. The polymerization time in a UV lamp is 2 minutes. Warning: if you want to use highly pigmented gel polishes, your UV lamp must be at least 36 W and LED lamp at least 9 W, and the bulbs must be changed on time.
4. Apply a thin layer of top coat for gel polish, cure in LED lamp for 90 seconds. In a UV lamp, the maximum amount of time indicated on the timer.
5. Apply cuticle oil when finished.