ADORE Gel for extension One Drop Gel buy in Amoreshop
One Drop Gel is a medium-thick gel for building, strengthening and correcting the architecture of nails of medium and above average length.
Used for:
- extensions on upper and lower forms;
- strengthening and correction of nail architecture using the “no filing” technique and combined techniques in combination with more rigid polymer materials.
The gel has a convenient medium-thick consistency, moderate thixotropy and crystal transparency. It does not spread or bubble when laid out. It absorbs pigments well to create colored self-mixes.
Advantages of one Drop Gel:
+ convenient medium-thick consistency;
+ cold polymerization;
+ natural shades.
The main advantage is excellent self-leveling.
Volume: 60 ml
Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free cloth) degrease
2. Dehydration/dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the NP.
3. Bonding: when using the PRO BASE-BOND adhesive base, skip this step.
4. Base coat: apply a uniform primer layer of PRO BASE-BOND base coat, carefully framing the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire surface of the nail, leaving a distance of 1 mm from the cuticle.
Apply a second leveling layer on the uncured gel, taking into account the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 minutes, in an LED lamp - 90 seconds.
Remove residual stickiness with PREP&FINISH and a lint-free cloth. Use a 150/180 grit file to file the shape step by step.
PRO Tips:
- to make it easier to lay out the material, you can use upper forms or gel tips.
- to prevent peeling from the free edge, we recommend filing the natural nail from the inside by 1-2 mm.
Extension: prepare/install forms on each finger in turn. Place a thin base of the desired length and shape directly on the lower or upper form, and model the nail architecture with gel. To create an arch, you can press the gel for 7-12 seconds, depending on the type and power of the lamp. Then send the nail to the lamp until the gel is completely polymerized for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove residual stickiness with PREP&FINISH and a lint-free cloth. Use a 150/180 file to file the shape step by step.
PRO tip:
Apply the gel at a distance of at least 1 mm from the cuticle to avoid peeling of the material in this area.
Why you should order ADORE Gel for extensions One Drop Gel from our website
The Amoreshop store always offers a wide range of products at a low price, and customer support will help you quickly resolve any issue you may have.
You can see the entire range of products by going to https://amoreshop.com.ua/
